FORGED X makes an aluminium canopy for the LDV T60 and T60 MAX dual cab. The T60 shares tub dimensions with the current Isuzu D-MAX and Mazda BT-50, so the same canopy unit covers all three. It clamps on with no drilling and comes with solid sides or sliding dog windows.
Which FORGED X canopy fits your T60
| Canopy | Series | Years | Notes |
|---|---|---|---|
| LDV T60 / T60 MAX canopy | T60, T60 MAX | 2017 onwards | Same tub dimensions as D-MAX and BT-50 |
T60 or T60 MAX?
The T60 has been sold since 2017, and the T60 MAX followed with an updated drivetrain. Both use the same dual cab tub, so one canopy fits both.
The same canopy unit also fits the LDV T90. If you are unsure of your model, send us your VIN.
Solid sides or dog windows on a T60
The T60 is often bought as a work and fleet ute, where solid sides keep tools hidden and avoid side glass.
For a T60 MAX used for touring, dog windows give kerbside access and airflow through the tub.
Both options have a glazed lift-up rear door on gas struts, marine-grade 5052 aluminium construction, seals and drainage around every opening for dust and corrugations, and a powder-coated matte black finish.
Weight, payload and roof load on the T60
A FORGED X dual cab canopy weighs from around 60 kg, depending on the vehicle and the side option. Everything you add counts towards your T60's GVM — the canopy, racks, drawers, water, fuel, passengers and gear — so add up the full setup and compare it with the payload on the compliance plate. Keeping the canopy light is what lets many owners stay within their factory GVM.
The roof is rated to 150 kg dynamic, while driving, and 300 kg static, while parked. Include the weight of your bars or rack in that total. A rooftop tent is fine on the T60 canopy as long as the tent and bars stay within 150 kg on the move, and the tent, bedding and occupants within 300 kg when parked.
Fitting a canopy to the T60
Every FORGED X canopy clamps to the factory tub rail with the supplied hardware. There is no cutting and no drilling, and the canopy can come off again later with the T60 tub left as it was.
Fitting is available at our Slacks Creek centre in Brisbane — contact us to book and we will confirm the details for your vehicle. Canopies are also sent Australia-wide on pallet freight for fitting by your own installer. Spare seals, struts, glass and mounting hardware are held in stock at Slacks Creek.
Racks, tracks and locking
The roof has built-in tracks along its full length. Racks, awnings, recovery board mounts, solar panels and light bars bolt straight down, with no drilling. Yakima track-mount accessories have been tested as a direct fit with no adaptor plates, and the track profile also takes other common bolt-in systems.
An optional plug-and-play central locking kit connects to the T60's existing wiring, so the factory key locks the cab and the canopy together.
T60 canopy questions
Does the T60 canopy fit the T60 MAX?
Yes. They use the same tub.
Does the T60 canopy fit an Isuzu D-MAX?
The same canopy unit fits the 2020-on D-MAX and the TF BT-50, which share these tub dimensions.
Do you make a T60 single cab canopy?
Yes, on request. The canopies listed in this guide are made for the dual cab tub, and single cab versions are made to order. Send us your T60's year, cab type and tub measurements and we will come back to you with a quote.
Shop the range
Not sure which canopy fits? Send us your build date or VIN through the contact page or call +61 7 2150 3688 and we will confirm before you order.